• Skip to main content
  • Skip to primary sidebar
The Loadout Room

The Loadout Room

Professional Gear Reviews

Hardcore Gear and Adventure

Menu
  • Shooting
        • Pistol
        • Pistol Accessories
        • Rifle
        • Rifle Accessories
        • Shotgun
        • Machine Guns
        • Air Guns
        • Ammunition
        • Optics and Sights
        • Weapon Lights
        • Tips & How-To
        • Concealed Carry
        • Holsters
        • Suppressors
        • Precision Rifle Shooting
        • Firearms Training
        • m142Too Tough to Die: The M14
        • craft holstersCraft Holsters Makarov Tuckable IWB Holster Report
        • t5Tommy Gun Madness: The Thompson Submachine Gun
        • augFiring the Full-Auto Steyr AUG
    • Close
  • Gear Reviews
      • Mission Gear
      • Camping Gear
      • Survival Gear
      • Medical Gear
      • Adventure & Travel
      • Knives & Tools
      • Overland
      • Disaster Preparedness
      • Footwear
      • Womens Gear & Clothing
        • ac65a540-2ef3-4598-8d11-afdf53f46e94.__CR0,0,970,600_PT0_SX970_V1___Streamlight ProTac Rail Mount HL-X: A Thoroughly Bright Review
        • Bluetti 2 handsfree power backpackBluetti Handsfree 2 Review: The Ultimate Power Backpack for Off-Grid Adventurers
        • The Gallagator 10 day pack on the shoreline next to a hiking trail.Day Pack – Mystery Ranch Gallagator 10 – The Best Yet?
        • PXL_20240209_171721326Pic of the Day, It’s Graduation Time
    • Close
  • Men’s Lifestyle
      • Fitness
      • EDC
      • Eyewear
      • Watches
      • Electronics & Technology
      • Downtime
      • Mens Clothing & Accessories
      • Manly Skills
      • Style & Grooming
      • Gentleman Drinks
      • Crate Club
        • craft holstersCraft Holsters Makarov Tuckable IWB Holster Report
        • rs3CIVIVI RS71 Review : Big Blade Energy
        • civivi2Civivi Brazen Review: The Best Budget EDC Knife under $75?
        • G43_Gen3-107G43 Review: The Compact Powerhouse for EDC
    • Close
  • News
  • Video Demo
  • Buying Guides
  • Shop
  • Advertise
Firearms Accessories

Crosshair Hydraulic Buffer: Shoot Straight and Protect Your Carbine

April 10, 2018 by Mark Miller Leave a Comment

Crosshair Hydraulic Buffer Review

Crosshair recoil buffers are a hydraulic rate/recoil-reducing buffer which provides a drop-in replacement for existing mechanical buffers. The machined aluminum hydraulic buffer drops into any standard carbine buffer tube to absorb recoil, slow cyclic rate of fire, and suppress bolt bounce. Linear deceleration technology helps increase service life of parts by reducing the force of impact, and the softer recoil impulse is easier on optics. It works with any standard carbine buffer spring.

AR-15 rifles use a recoil spring to cycle the action. For reliability, Stoner used a buffer and a spring. After firing, gas pushes the bolt carrier group back into the buffer tube. The bolt pushes against the buffer’s mass compressing the spring. The spring stores the energy and pushes the buffer and bolt carrier group forward. The moving weights inside the buffer keep the bolt from bouncing.

Barnes Ballistics Research conducted a series of tests to analyze and assess a Crosshair recoil buffer built for the AR-15 platform. It was noted during accuracy testing that there was a significant difference of felt bolt bounce by the shooter when comparing the Crosshair recoil buffer to the stock buffer. While firing full auto during the cyclic rate test, there is an added level of control of the firearm due to the lowered rate of fire. This aids the shooter and his ability to reduce muzzle climb and stay on target.
-Greggory Sloan, Barnes Ballistics Lab

The carbine length gas system on direct impingement AR rifles is the 7” long. This provides less time for the brass to cool and contract before the gas pushes the bolt carrier group back to extract it. Many AR manufacturers, seeking to prevent malfunctions with popular brands of under-loaded cheap ammunition, over-drill their gas ports from the military spec of .063 and use a standard weight carbine buffer. This causes excessive pressure which can create excessive wear on the action spring, receiver extension, bolt carrier, and extractor, and exponentially increases malfunctions. We can mitigate all these issues by using a hydraulic buffer.

The Crosshair hydraulic buffer reduces the energy transferred to the rifle and moves the gun less. It accomplishes this by reducing the bolt carrier reaction force and return velocity after each round is fired. When the bolt goes forward and chambers it takes a fraction of a second for the hydraulics to go all the way forward to stop the bolt when closing. When using a carbine length gas system, the delay allows the hot expanded brass to shrink back down more which allows easier extraction from the chamber. Less recoil aids in fast follow-up shots, too.

 

The Crosshair buffer housing is made from a high-strength aluminum alloy that is highly corrosion resistant and designed for use in the most extreme environments. Durable high-impact steel striker cap withstands long use.

I got mine and rushed home to throw it into a gun and get to the range. As promised, installation is simple – you just replace the buffer. If you have a serviceable recoil spring, you may use the same spring. The first thing you notice when doing a function check it that the buffer doesn’t just stop at the end of the receiver extension. When you pull the charging handle back, it kind of mushes to a stop.

I loaded up about 300 rounds of Walmart American Eagle Ammunition 62 grain green tip with my Caldwell Mag Charger and started with a Colt M-4. With a Colt recoil spring and an H2 buffer, split times are almost exactly .1 seconds. Installing the Crosshair with the stock Colt recoil spring had no measurable difference in cyclic rate. I did notice a reduction in muzzle climb and better target transition. There was a slight reduction in felt recoil.

I switched to a PAC West lower and a Colt LE 6920 16” M-4 Upper. The amount of felt recoil is minimal, but that’s not the primary purpose of this device. The reduction in muzzle rise helps you stay on target, especially beneficial during rapid shooting for follow-up shots and target transitions.

I started with a Sprinco WHITE Spring, STANDARD Power Buffer Spring. This worked well with both the H2 buffer and the Crosshair hydraulic buffer. Because I had them, I tried the Sprinco RED and ORANGE Carbine springs. They were too strong for this set up and did not function well. A simple test to see if your gun is over-sprung is to load a magazine with one round, load it and fire. If the bolt locks back, your bolt is going all the way back. If the bolt fails to lock back, your buffer and spring are probably too heavy.

A Crosshair hydraulic buffer will enhance any gun, but it is particularly useful…
If you are shooting full auto or very fast semi-auto. (you guys know who you are.)
If you will be shooting with a suppressor.
If you will be shooting hot loads or very heavy bullets.
If you want maximum recoil reduction.

Adding a Crosshair hydraulic buffer will give you a higher functioning rifle and extend the service life of its parts. It keeps the rifle in battery slightly longer so the extractor is more effective. The Crosshair buffer can also reduce the recoil impulse especially with over-gassed guns allowing for more efficient shooting.

Crosshair Hydraulic Buffer features:

  • Drop-in Replacement
  • Reduces Felt Recoil
  • Improves Accuracy
  • Reduces Bolt Bounce
  • Protects Optics from recoil damage

The Crosshair recoil buffer is compatible with .223 and 5.56x45mm NATO cartridges. Machined aluminum exterior, green anodized finish, steel striker cap. 3½” (8.8cm) long, .95″ (2.4cm) O.D. 3.2 oz. (91g) wt. For use on rifles fitted with M4-type collapsible butt stock.

Where to Buy

The Crosshair recoil buffer can be purchased from:

  • Buffertech.com
  • Brownells.com

Photo courtesy of Crosshair

Share This

About the Author

Mark Miller is a Green Beret who served in Afghanistan and a number of other live fire locations. He's a poet-warrior in the classic sense, a casual hero and a student of science.

See All Mark Miller Articles

More From The Loadout Room

Comments

Primary Sidebar

Most Read

  • Removing Rust From Firearms? No Problem
    Removing Rust From Firearms? No Problem
  • Breek Arms Sledgehammer: The AR-15 Charging Handle That Gas Can’t Touch
    Breek Arms Sledgehammer: The AR-15 Charging Handle That Gas Can’t Touch
  • ARES Watch Company Diver-1 & Field Watch: Unstoppable Tactical Watches for Land & Sea
    ARES Watch Company Diver-1 & Field Watch: Unstoppable Tactical Watches for Land & Sea
  • The Biggest Little Roundgun: The 3-Inch Kimber K6s
    The Biggest Little Roundgun: The 3-Inch Kimber K6s
  • Mossberg 930: the affordable 12 gauge auto-loader
    Mossberg 930: the affordable 12 gauge auto-loader

Find Us on Facebook

Recent Comments

  • Woox Store on Tommy Gun Madness: The Thompson Submachine Gun
  • Ajita Sherer on The ACR (Adaptive Combat Rifle)!
  • Raphael Hanna on The ACR (Adaptive Combat Rifle)!

Latest From SOFREP

Army

Army Rangers Under Investigation For Firing Blanks Near Partying Civilians on Crab Island, Florida

Firearms

Barrett and MARS Win Big in Army’s xTech Soldier Lethality Challenge

News

An Early Morning Shooting at CIA Headquarters

Op-Ed

The Bolduc Brief: The Ethical Imperative of Leadership – A Critical Evaluation of the $400 Million Aircraft Controversy

Military Content Group

© Copyright 2025 Military Content Group · All Rights Reserved.

  • Privacy Policy
  • Terms of Use
  • Advertisers