• Skip to main content
  • Skip to primary sidebar
The Loadout Room

The Loadout Room

Professional Gear Reviews

Hardcore Gear and Adventure

Menu
  • Shooting
        • Pistol
        • Pistol Accessories
        • Rifle
        • Rifle Accessories
        • Shotgun
        • Machine Guns
        • Air Guns
        • Ammunition
        • Optics and Sights
        • Weapon Lights
        • Tips & How-To
        • Concealed Carry
        • Holsters
        • Suppressors
        • Precision Rifle Shooting
        • Firearms Training
        • skorpFull-Auto Fun — Shooting the full-Auto vz. 61 Škorpion
        • p320-full-leftSIG Sauer M17/M18/P320 Pistol Just Can’t Seem to Escape Safety Controversies
        • TISAS_10100520_1__98179Tisas 1911A1 U.S. Army Review: Best Budget .45 ACP WW2 1911 Clone?
        • Photoroom_20250531_143432Pyramyd AIR’s Springfield Hellcat Pro CO2 BB Pistol Is the Ultimate Dry-Fire Trainer
    • Close
  • Gear Reviews
      • Mission Gear
      • Camping Gear
      • Survival Gear
      • Medical Gear
      • Adventure & Travel
      • Knives & Tools
      • Overland
      • Disaster Preparedness
      • Footwear
      • Womens Gear & Clothing
        • Hunting in TexasThese 5 ATV Dealers Will Get You Ready For Hunting Season in Texas
        • ac65a540-2ef3-4598-8d11-afdf53f46e94.__CR0,0,970,600_PT0_SX970_V1___Streamlight ProTac Rail Mount HL-X: A Thoroughly Bright Review
        • Bluetti 2 handsfree power backpackBluetti Handsfree 2 Review: The Ultimate Power Backpack for Off-Grid Adventurers
        • The Gallagator 10 day pack on the shoreline next to a hiking trail.Day Pack – Mystery Ranch Gallagator 10 – The Best Yet?
    • Close
  • Men’s Lifestyle
      • Fitness
      • EDC
      • Eyewear
      • Watches
      • Electronics & Technology
      • Downtime
      • Mens Clothing & Accessories
      • Manly Skills
      • Style & Grooming
      • Gentleman Drinks
      • Crate Club
        • Tom and Blake Sell TeaHow Sasquatch Tea Is Revitalizing a Stagnant Tea Market With Veterans and Outdoorsmen in Mind
        • redcat-blackwidow-articleheaderWar of Words: In the Ultra-Competitive Defense Tech Industry, Storytelling is a Secret Weapon
        • Photoroom_20250525_074933Juggernaut Tactical Frame Review: The Best Upgrade for Your 365
        • craft holstersCraft Holsters Makarov Tuckable IWB Holster Report
    • Close
  • News
  • Video Demo
  • Buying Guides
  • Shop
  • Advertise

Roll Pin Pusher (RPP) – AR-15 Tool Review

Roll Pin Pusher RPP - thearmsguide.com

Anyone who has ever built an AR-15 lower receiver can tell you that there is a higher probability for damaging the receiver when installing the trigger guard roll pin than any other component. The reason behind this is improper support of the “dog ears” or trigger guard tabs. It is crucial that these tabs be properly supported while forcibly pounding the trigger guard roll pin into place. If you don’t, you risk permanently breaking one (or both) of these tabs off.

Roll Pin Pusher RPP - thearmsguide.com
Here is the RPP, the guide rod and pin pusher tip. The quarter is for size comparison. Image courtesy of Little Crow Gunworks

I always prefer to get my marks and scars on my AR-15s from using them rather than building them—especially if I am building a lower receiver for a friend or family member and I didn’t pay for it. Permanently breaking a tab off on a lower receiver that I am building for someone else would not only prove an expensive mistake, but also embarrassing and unprofessional.

I was relieved when I discovered the Roll Pin Pusher (RPP) from Little Crow Gunworks. Using the RPP has removed any anxiety I once had when installing the trigger guard roll pin and is actually faster than using roll pin punches.

How It Works

Instead of pounding, hammering or punching the trigger guard roll pin, the Roll Pin Pusher almost effortlessly pushes the roll pin into place. I do not have to use any support for the dog ears since the RPP uses a small guide rod to keep everything lined up properly. In the video above, I show how to use the RPP in real time, but here is a basic run down of how to use it to install a trigger guard roll pin.

Roll Pin Pusher RPP - thearmsguide.com
Here is a zoomed in view of the RPP in action. By just turning the handle clockwise, the roll pin is pushed right into place.

1. Place the trigger guard between the dog ear tabs on the lower receiver.
2. With the base over the trigger guard, place the RPP guide rod through the hole in the rear of the RPP, through the dog ear tab and then through the trigger guard. This will hold everything in place, including the RPP.
3. Unscrew/loosen the handle and place the trigger guard roll pin into the recessed end of the RPP.
4. Slowly tighten the RPP until the trigger guard roll pin has starts to move into the first dog ear tab. Stop turning before the RPP touches the receiver.
5. Unscrew the RPP and then place the roll pin pusher tip (the one with the nipple end) into the recessed end of the RPP.
6. Turn the RPP clockwise and as it is tightened, the roll pin will be pushed into place and the guide rod will be pushed out and through the hole in the rear of the RPP. Keep turning until the roll pin is pushed flush with the receiver.
7. Once the trigger guard roll pin is in place, remove the guide rod and RPP from the lower receiver and verify correct installation of the roll pin and trigger guard.

Personal Experience

Based on my own personal experience with using the Roll Pin Pusher, here is what I like about the tool and also some advice for those who may want to use it:

  • Using the RPP properly makes it almost impossible to damage your lower receiver. However, there is always room for human error. You will still have to pay attention to make sure you do not over tighten the RPP, or you will risk scratching your lower receiver. With that being said, I feel that an error possibly leading to a scratch is still better than an error leading to a broken lower receiver. Using the RPP properly removes the possibility of permanently breaking the trigger guard tabs off.
  • The guide rod and roll pin punch tip included with the Roll Pin Pusher are loose and can be lost. Using a piece of tape to secure said pieces to the RPP after using them works fine for me.
  • Using the RPP to remove the trigger guard roll pin is possible and I have done it several times. Make sure to stop tightening the RPP if any resistance is felt as this is an indicator that something is not lined up properly. To see a full video on both removing and installing a trigger guard with the RPP, watch my full review here.
  • Based on my personal experience, the RPP is definitely faster than using a hammer and roll pin punch. In fact, my first trigger guard roll pin installation took me about 30 minutes because of how cautious I was being to not break any tabs off. I could see how saving time would be important to those that build multiple lower receivers a day (i.e. manufacturers or gunsmiths), as well as for your average “do-it-yourselfer.”
  • The RPP will not assist with fixing a lower receiver that is already broken. It only helps to prevent breaking one in the first place. However, if you or someone you know has unfortunately broken the tabs off on an AR-15 lower receiver, installing one of these grips can be more cost effective than buying a new receiver.
Roll Pin Pusher RPP - thearmsguide.com
Roll Pin Pusher image courtesy of brownells.com

Price and Ordering Information

The Roll Pin Pusher has a retail price of $39.95 (+s&h) and can be purchased directly from Little Crow Gunworks via their website or by calling the shop and speaking directly with the inventor, Dale Hegstrom. RPPs can also be purchased at such outlets as Brownells or MidwayUSA.

If you ask me, spending roughly $40.00 is cheap insurance against a broken lower receiver—and it certainly beats paying over $100 for an entire new one.

Share This

About the Author

Nate Schultz Nate Schultz is employed within the field of Law Enforcement, is an avid shooter, firearms enthusiast and hobbiest gunsmith. When he is not writing for The Arms Guide, he is producing content for his YouTube channel: www.youtube.com/nsz85

See All Nate Schultz Articles

More From The Loadout Room

Comments

Primary Sidebar

Most Read

  • Mossberg 930: the affordable 12 gauge auto-loader
    Mossberg 930: the affordable 12 gauge auto-loader
  • M4A1 Block I: The Special Operations Origins of an American Icon
    M4A1 Block I: The Special Operations Origins of an American Icon
  • The Biggest Little Roundgun: The 3-Inch Kimber K6s
    The Biggest Little Roundgun: The 3-Inch Kimber K6s
  • Vakarian Plate Carrier Review: Elite Comfort and Modularity for Under $300
    Vakarian Plate Carrier Review: Elite Comfort and Modularity for Under $300
  • West Coast Armor IIIA Plates Review: Lightweight, American-Made Protection
    West Coast Armor IIIA Plates Review: Lightweight, American-Made Protection

Find Us on Facebook

Recent Comments

  • Winston Smiths on Mossberg 930: the affordable 12 gauge auto-loader
  • Jared Mize on The Fairbairn-Sykes Fighting Knife: A Commando Blade That Changed Special Forces Forever
  • GomeznSA on MAC-10: The Wild History of America’s Most Iconic (and Overrated) Submachine Gun

Latest From SOFREP

News

Evening Brief: Kenya Protests Turn Deadly, Former Russian Transportation Minister Found Dead, Secretary of State Rubio Heads to Malaysia

Op-Ed

America Must Not Repeat the Mistakes of Bush’s Afghan War

Expert Analysis

Situational Awareness: A Navy SEAL Explains

Military History

Medal of Honor Monday: Alwyn Cashe-A Hero Forged in Fire

Military Content Group

© Copyright 2025 Military Content Group · All Rights Reserved.

  • Privacy Policy
  • Terms of Use
  • Advertisers
 

Loading Comments...