glock 43

Bravo Concealment Glock 43 IWB Torsion holster

Loadout Room writer, Tim M, pits the Bravo Concealment Torsion holster up again a few other options and weighs in on why the Torsion holster stands above them all.

QUALITY KYDEX TORSION GUN HOLSTER FOR GLOCK 43 FEATURES:

Custom-made for the Glock 43 pistol.
Even Deeper Concealment with NEW Torsion Technology.
Integrated 10 degree inward cant for greater conceal-ability.
Designed specifically for IWB / Appendix concealed carry.
Virtually drops out of sight and erases your weapon’s visual signature.
Comfortable to wear.
One of few IWB holsters offering retention.
Holster adds minimal mass to the weapon.
Holster retains its shape for efficient one-handed reholstering.
Gun Holster allows for Sights up to .355 (In).

For more information and to purchase

Why I chose the Glock 43 as my concealed carry pistol

I’ve been carrying a concealed pistol now for just about thirty years. I’ve gone through more than my share of different pistols and holsters during that time from a S. & W. Chiefs Special 5 shot revolver to Glocks. The Glock pistols have become my favorite over the years due to its lightweight, easily replaced parts, and reliability. I started out with a Gen 1 model 17 when they first came out and the anti-gun crowd was saying that they could pass through metal detectors and were a threat to national security. Over the years my main carry pistols have generally been either the Glock 19 or 26, although I dabbled with the .40 caliber models and even had a Glock 30 in .45 ACP for a while but have always returned to the 9mm models.

After I retired from law enforcement in 2001 my go to Glock for concealed carry was the model 26. I always appreciated the model 26’s smaller size and concealability but it still felt blocky and was hard to conceal in light summer clothing. Enter the Glock 43 single stack 9mm pistol introduced in 2015. I was able to get one pretty early on and it has been my primary carry pistol ever since. Specifications are as follows from the Glock website:

Length (Overall) 159 mm | 6.26 inch
Slide Length 154 mm | 6.06 inch
Width (Overall) 27 mm | 1.06 inch
Slide Width 22 mm | 0.87 inch
Height incl.Mag.108 mm | 4.25 inch
Line of Sight (Polymer) 133 mm | 5.24 inch
Trigger Distance 65 mm | 2.56 inch
Weight: without magazine 460 g | 16.23 oz
Weight: with loaded magazine 585 g | 20.64 oz
Magazine capacity: 6

The slim profile and light weight of the Glock 43 make it a pleasure to carry year round. It conceals easily and doesn’t feel like you have a brick on your side. My favorite holsters are as follows:

Comp Tac paddle holster and magazine pouch
Blade Tech Classic OWB
High Threat Concealment Vantage holster and mag pouch
DeSantis to include both their leather belt holsters and the pocket Nemesis to include the cargo pocket model. These holsters give me options for just about any time of year and attire.

The only modifications I’ve made to my 43 has been to change the sights, I run Ameriglo Hackathorn sights, aside from that I added a Hogue HandAll. I have fairly large hands and the HandAll gives me a better purchase on the grip while shooting. For carry, I stick to Glock manufactured magazines. I carry a flat bottom one in the pistol, my reason is that the idea of a small pistol is for concealment so why would I add an extension that reduces the concealability of it. The flat bottom magazine does leave your pinky hanging out in the air but after years of carrying and shooting a model 26 with flat bottom magazines, I don’t find this to be a hindrance to my grip, accuracy, or follow-up shots. I carry at least one extra magazine and often two they are factory magazines with a Pearce +1 extension this aids in reloading and provides an extra round in the magazine.

I also have a blue gun model Glock 43 and magazine for use in training. One of the often missing links in handgun training is pressure testing your ability to protect your weapon when under physical attack as well as drawing and employing it. Having a blue gun allows you to also safely practice drawing when indoors.

Shooting the 43 is as much a pleasure as carrying it body shots at 25 yards are no problem and at 7 yards it is quick and accurate. Recoil is more than acceptable with most loads but can be a little snappy with the higher pressure loads. The most important issue I believe in quickly deploying the pistol to get accurate shots on target is to get a good solid grip right from the start, so that you are not adjusting the pistol in your hand when you should be focusing on the sights and firing. Reloads can be challenging if you have large hands due to the short grip causing the palm of your hand to be pinched when inserting a fresh magazine, practice will alleviate this issue. I like this pistol for everyday concealing carry, I’ve carried a lot of different pistols over the years and the only thing that has come even close was my S. & W. single stack 3813 that I carried as my Off Duty pistol when I was still on the job. If you’re looking for a concealment pistol and are a Glock fan I highly recommend the model 43.

Art Dorst is the owner of A. Dorst Consulting & Training Services and is a Senior Consultant for LaSorsa & Associates. He served in the U.S. Navy and Army National Guard, and is a retired municipal Police Officer, NRA Instructor, and is currently a security provider/trainer.

Tenicore Velo Appendix Inside the Waistband Holster

Tenicor Velo Appendix Inside the Waistband Holster

Tenicor – A Purposeful Design

Tenicor thinks outside of the box with a purposeful design and attention to quality. If you need to conceal a pistol, big or small, turn to Tenicore’s VELO Appendix Inside the Waistband (AIWB) holster.

VELO | ˈWEː.LOː| V. | LATIN means to Hide, Conceal, or Cover

The design of the Tenicor VELO holster checks all of the usual boxes for a quality concealed carry holster. The Tenicore Velo provides secure retention and precision fit but it doesn’t stop at that. The details of this intelligently designed holster are what set it apart. It’s not just another Kydex holster.

To dumb it down, the Tenicor VELO simply “bulbs out” at the right spot which causes the handle of the concealed pistol to turn into your body and not print on your cover garments. This multi-angled design also pushes the muzzle away from the body as it rotates the grip toward the body; a comforting reassurance as I personally don’t want to point my muzzle at something I really don’t want to destroy!

When worn in front of your hip for an appendix type carry, the bulb out causes the pistol to disappear under your shirt.

The model I tested was for a Glock 43 pistol, found here. I truly believe the design of this holster would allow me to conceal carry my long slide Glock 35 without a problem.

It Stays in Place

The provided Tenicor T1 Clip proved to be quite strong and durable. You can stagger the placement of the clips to allow for a canted carry. I chose to keep them in-line for a straight-up draw. These clips do a phenomenal job of keeping the holster right where you put it. When worn with a sturdy belt, this holster isn’t going to move. Not that I recommend it, but you could wear this holster with the Tenicor T1 Clip without a belt and it would stay in place.

Accommodates Future Plans

If you plan to install a red dot sight and suppressor height sights on your pistol, this holster will work. When I finish building my Glock 19 with an RMR and back-up suppressor sights, I hope to get my hands on another Tenicor holster for concealed carry and to share the results with you here.

Head over to Tenicor and check out their unique take on holster designs. If you’re Military/Law Enforcement/First Responder, email them at [email protected] with a copy of your official government ID and they’ll send you out a coupon code.

Don’t be fooled by the beautiful girl, she can be deadly.

Use code LOADOUTROOM for 10% off your order

Talon Grips | Getting a better grip without a permanent modification

I’m a fan of products that make your pistol easier to keep a hold of and make them more comfortable at the same time. Talon Grips continues to do just that with their grips for the Glock 43.

I have rather large hands but enjoy carrying and shooting my single stack 9mm Glock 43. Sometimes holding onto that small pistol frame can be a challenge as the pistol gets lost in my grip.

After only a few minutes of surface prep with the included alcohol swab, I was able to apply the precision cut custom grips from Talon onto my Glock 43. A few minutes of careful heat gun application and pressing the grip firmly to the frame and it looks and functions perfectly.

For such a significant addition to the pistol, you would think they would charge a lot of money. The grips are inexpensive, functional, and comfortable. You can pick up a set of the Talon Grips for your Glock 42 or 43 for only $17.99 with free shipping in either black, grey, or moss rubber finish or in black granulate. Both the granulate and rubber finish are great but I found myself preferring the rubber finish.

The grip is a full coverage addition with side panels, including above the thumb rest, high coverage on the backstrap, and full coverage under the trigger guard. for just a $1.99 more, add the grip coverage for your magazine base plate grip extension!

Have a different pistol than the Glock 43 that you need to get a grip on? Head over to www.talongungrips.com and check out the wide selection of grips for pistols or even the Shockwave shotgun.

Talon Grips are the only US Patented single piece adhesive style wrap around grips and they are made in the USA, out of Steamboat Springs, CO to be exact.

Pay attention to what cleaners you are using on your pistol after installing Talon Grips and make sure they are a product that won’t attack the adhesive. Products such as aerosol cleaners like Brake Cleaner, Break-Free, Birchwood Casey Gun Scrubber, etc. I’ve been using Frog Lube with my OTIS gun cleaning kit lately with good results of getting my guns clean and not ruining my Talon Grips.

If you’re looking for basic pistol training or advanced pistol training in the Pacific Northwest, come see us at Willapa Firearms Training.

Grey Ghost Precision Announces New Color Offerings for SPG43 Slides

Lakewood, WA – Grey Ghost Precision, leading manufacturers of accurate, reliable, and attainable weapon systems, is excited to announce the that they are now offering three new Diamond-Like Coating (DLC) color options to their SPG43 GLOCK43 Slides.

GGP announced the release of their SPG43, the first true aftermarket upgrade slide for the G43 at SHOT Show 2018, in Las Vegas, NV. Precisely machined from a billet blank of American made, certified 17-4PH Stainless Steel with critical tolerances held to +/- .003”, the SPG43 has withheld the reliability and accuracy that Grey Ghost Precision’s products have been known for within the industry.

The initial line of SPG43 slides were originally only available in a DLC signature Grey color; and are now offered in Black, Bronze and Flat Dark Earth, in addition to Grey for both V1 and V2 versions.

DLC was chosen for its high levels of strength, hardness and corrosion resistance, along with its inherent lubricity which lends itself to reducing friction between metal surfaces.

“We are excited to bring more DLC color options to our customers,” stated GGP Vice President of Firearms, Jason Curns. “With the explosion of aftermarket options for the G43, it was important for us to give our loyal GGP customers more choices to build the G43 of their personal specifications.”

As is the case with every other product that comes out the door at Grey Ghost Precision, the SPG43’s attention to detail, fitment and mindset for the end user is paramount. The team spends no time, wasted on production – partnering with only the best in the industry, receiving feedback on exactly what the end users are looking for in a concealed carry pistol.

SPG43 SPECS
• Made from American 17-4PH Stainless Steel
• All critical dimensions held within +/-.003dz
• Strategically placed patterns for ease of use and function
• Coated with choice of Black, Grey, Bronze or Flat Dark Earth color options in DLC
• Ready to accept all GLOCK or aftermarket OEM G43 components
• Ready for GLOCK or OEM components to install right away

The Grey Ghost Precision SPG43 is available for pre-order now for end of July delivery. Visit www.greyghostprecision.com for more details.

About GGP
Grey Ghost Precision produces weapon systems that are accurate, reliable, and attainable while ensuring that these platforms are ready for combat and will stand the rigors of hard use and perform with devastating results. The GGP team collectively has an extensive background in the military and in manufacturing. Rifle and pistol design specifications are directly influenced by a network of industry and shooting sports experts. When customers include family and friends that use these rifles, pistols and accessories to protect themselves in dangerous environments, you are very serious about their safety and survival. GGP has zeroed in on quality and reliability to ensure that these platforms are ready for combat and will stand the rigors of hard use and perform with devastating results.

Modifying the Glock 43 | Tyrant Designs Extended Mag Release

Introduced in 2015 the Glock 43 was the first single stack 9mm pistol in a long line of double stack offerings from the Austrian manufacturer. This model was long overdue in both my opinion and that of many Glock fans. As much as I love to carry the Glock 19, it’s isn’t the most concealable option for me while wearing lighter summer clothing. For this, the single stack model 43 has the perfect profile. At only an inch thick, the Glock 43 can be concealed quite effortlessly.

We all know the Glock isn’t a perfect pistol right out of the box. Many owners look for new sights to replace the factory plastic pieces. Or a new trigger with a cleaner, lighter break. Another simple yet inexpensive upgrade is the magazine release. Tyrant Designs, better known for their skeletonized AR pistol grips, has taken their CNC expertise and produced a brilliant little mag release for the Glocks.

Tyrant Designs Extended Magazine Release

Installation is effortless and should take the average person about a minute to pop it into place. The extended mag release is CNC machined from aerospace grade aluminum ensuring an exact fit and beautiful finish. Offered in 5 different colors, you can select a bright contrast or a subtle color for your pocket pistol. Additionally, the slightly extended magazine release has an interesting chevron pattern machined onto the face. Its striking looks are second only to the tactile experience. My thumb had no problem locating and manipulating this little gem. As expected, it dropped the empty magazines without any issue.

While new sights, a match barrel or trigger assembly are all sexy pieces, the extended magazine release is an easy and affordable component to swap out. For such a small part, the Extended Magazine Release from Tyrant Designs is a solid purchase. Made in the USA and retailing for only $27.95, this is your gateway drug to the new addiction of modifying your Glock pistol.